FPV-POWER 12V REGULATOR 1.5A

Description

The FPV-POWER 1.5A 12V Regulator is designed to be used with fishfinders needing a minimum of 11V to run. At 11V your battery will typically still have between 1/4 to 1/3 capacity left, however, the fishfinder will still cut out as it hits its minimum operating voltage. FPV’s regulator prevents this, allowing you a greater runtime using your fishfinder by maximising the battery’s capacity. The regulator is installed inline between the battery and the fishfinder and will provide a constant 12V to the fishfinder right until the battery reaches its safety cutoff.

Note: This Regularor Suits small sounders, Typically 4 or 5″.  for larger sounders and a higher amp rating see FPV’s 5 amp regulator here

Specifications:

Voltage: 12V (can be adjusted to any voltage)
Max Load: 1.5A
Dimensions: 10 x 5 x 5.5cm
Weight: 125g
Case: IP67 Waterproof hard case (waterproof only when leads are connected)